无损重力式成品均化料仓
Non-destructive Gravity Finished Product Homogenization Silo
改性塑料行业因为原材料产地差异，生产过程中的压力，温度催化剂活性的变化等诸多因素会导致不同批次产品的相关物料物性参数会有一定差异和质量波动，这种波动会给下游用户带来不利影响。尤其一些生产色母粒的厂商，对生产出来的颗粒的批次差要求更为严格
Due to the differences in the origin of raw materials, the pressure in the production process, the change in the activity of the catalyst, and many other factors, the modified plastics industry will cause certain differences in material properties and quality fluctuations of different batcher of products. This fluctuation will bring downstream users Adverse effects, especially for manufacturers of masterbatch , require stricter batch requirements for the produced pellets.
为了消除这种质量波动和批次差，最好的办法是将切粒后的多批次的产品进行掺混，多次掺混可以消除批次差，从而获得较为均衡的产品质量，传统的均化工艺除了消耗巨大的能量还会造成产品被粉碎。由此产生粉尘。还会引起静电，同时也会导到设备磨损，搅拌装置难清理的问题。
In order to eliminate this quality fluctuation and batch difference, the best way is to mix the multi-batch products after dicing, and the multiple blending can eliminate the batch difference, thus obtaining a more balanced product quality, traditional in addition to consuming huge amounts of energy, the homogenization process can cause the product to be pulverized, thereby generating dust, causing static electricity, and also causing wear of the equipment and difficulty in cleaning the stirring device.
恩必信公司自主研发的重力式均化料仓，可达到节能高效，几乎不消耗能量，依靠物料自身重力高质量的完成输送、掺混全过程，经广大客户试用，效果极佳，口碑良好。是改性塑料行业成品均化的好帮手。
The gravity-type homogenization silo independently developed by the company will be energy-efficient and consume almost no energy. Relying on the material’s own gravity ad high quality to complete the whole process of transportation and blending, it has been tested by the customers, with excellent effect and good reputation it is a good helper for the finished product of the modified plastics industry.
特点：
Features :
自动掺混，能耗低
Automatic blending, low energy consumption
料仓无任何搅拌装置，管道快速卡扣链接，超大清理门，好清理，快捷方便
The silo does not have any stirring device, the pipe quick buckle link, the large cleaning door, good cleaning, quick and convenient
料仓、管道全部SUS304不锈钢材质，不会污染原料
Silos and pipes are all made of SUS304 stainless steel, which will not pollute raw materials
负压式输送，噪音低
Negative pressure transmission, low noise
PCB电脑板或PLC控制，稳定、故障率低
PCB computer board or PLC control, stable, low failure rate
VOC异味处理系统
VOC Odor Treatment System
VOC异味处理系统是近年来顺应环保要求为塑料行业量身定制并研发生产的，针对各种改性塑料内对人体危害严重的主要挥发性有害有机物的处理系统
Voc odor treatment system is a system that has been tailored to the plastic industry and developed in recent years to meet the requirements of the environmental protection industry. It is aimed at the treatment system of major volatile and harmful organic compounds that have serious harm to human body in various kinds of modified plastics.
VOC异味处理系统的工艺：是通过高温法，以模拟正常使情况、湿热情况共以及热带气候区域，针对塑料内含有的苯、甲苯、二甲苯、乙苯、苯乙烯、甲醒等的处理，使挥发性有机物浓度的强度值，控制在对人体无害的范围内，主要针对汽车内饰件的塑胶原料，通过热风干燥，物料持续循环使原料受热，在达到设定温度后，将残留在原料中的VOC释放出来，以达到检测要求，常用在汽车内饰件中的仪表盘及密封条等材料（PP、PA、AS、TPV、TPU、TPR、TPE等）
The process of voc odor treatment system: through the high temperature method, to simulate normal sue, damp and hot conditions and tropical desert climate region, the treatment of benzene, toluene, xylene, ethylbenzene, styrene, formaldehyde, acrolein, etc. in plastic, and so on, to control the intensity of the concentration of volatile organic compounds in the human body. Within the scope of the damage. Mainly for the plastic materials of automotive interior parts, the raw material is heated by hot air drying and the material continues to circulate. After setting the temperature, the residual voc in the raw material is released. To requirements, materials such as dashboards and scaling strips commonly used in automotive interior parts(PP,PA,AS,TPV,TPU,TPR,TPE etc.)are commonly used.
主要配置
Main configuration
采用立式双层SUS304不锈钢保温隔热筒体，中间夹层安装隔热保温材料保温，保温效果好
Adopt vertical double layer SUS304 stainless steel thermal insulation cylinder, and heat insulation material is installed in the middle sandwich, so the insulation effect is good.
独立双区加热装置，干燥效果好，可实现连续式工作。加温部分采用可控硅电力调整器控制，节能省电
The independent double temperature zone heating device has good drying effect and can realize continuous work . the heating part is controlled by a silicon controlled electric regulator, saving energy and
输送部分采用知名品牌高压风机动力源。可实现2500KG/H的输送量，均化干燥同步，可实现自动和手动两种模式控制
Electricity. The3. Transmission part uses the well-known brand high pressure wind power source, can realize the 2500KG/H transport volume, homogenize drying synchronization, can realize automatic and manual two
控制部分采用西门子全新一代PLC编程和触摸屏控制，施耐德等知名品牌电器。界面操作人性化。操作简单快捷，功能强大
Kinds of mode control. The 4. Control part uses the SIEMENS new generation PLC programming and touch screen control, Schneider and other famous brand appliances, the interface operation is humanized, the operation is simple and fast, the function is strong. Big.