Product Name:6052 Polyimide Film/PI Film
BOPI (Biaxial Oriented Polyimide film, similar to Kapton HN) is achieved by polycondensation of PMDA and ODA in strong polar solvents, through the process of film forming, and then being stretched and Oriented by biaxial during the course of imine at high temperature. BOPI film (similar to Kapton HN) is a special kind of polyimide film. Because of biaxial orientation process, BOPI film possesses higher physical, chemical, and electrical properties. It performs successfully in low & high temperature as range of temperature from -452F(-269c) to +500F(+260c) and can be exposed at +752F(400c) in short time. It is widely used as insulation material in F~H class electric motors, electric locomotive, high temperature cables, backing or cover film of FPCB (flexible printed circuit) applications, aerospace industries.
Specification
1. Width: 1000mm,or Slit into your request width of kapton tape; Thickness tolerance: +-10%
2. Min Qty: 100kgs each size in a lot. Packing: 25--50 Kgs/carton.
Characters
* Higher mechanical strength, better dielectric strength with thinner insulation ply;
* Excellent heat resistance ,used as class- H insulation and can work for a long term at
180°C but short time at 260°C;
* Good flexibility, better tear resistance and excellent workability, and can be glued on the
different-sized workpieces;
* Self-sticking and good bonding strength , no removal after stripping off;
* Different thickness and width to meet customers’ specific requirements
Application
Electrical and Electronics, circuit board manufacture
H grade electric engine, transformer coil and capacitor insulation wrapping up in high-temperature, high-voltage condition
SMT thermal resistance, golden finger protection of PCB board
High temperature resistance and waterproof for electronic transformer, relay
Technic Index
Primary Competitive Advantages:
Form A,PackagingGreen Product,Price,Service,International Approvals,Small Orders Accepted,Experienced Staff,Prompt Delivery
About factory:
Jiangsu Yabao Insualtion Material Co., Ltd. was established in 1986, specializing in producing insulation materials:
Packing
The film should be provided in rolls and wound up to the pipe core, each roll is well packed and loaded with plastic bag to be placed into dry and clean box.