EN 15534-1塑料合成复合材料混合物及产品性能测试方法--测试标准
EN 15534-1 Composites made from cellulose-based materials and thermoplastics（usually called wood-polymer composites(WPC) or natural fibre composites(NFC)） Part 1 Test methods for characterisation of compounds and products
EN 15534-1 纤weiji和热塑性塑料合成复合材料（通常称为木塑复合材料或天然纤维复合材料） 第1部分：混合物及产品性能测试方法
EN 15534-1塑料合成复合材料混合物及产品性能测试方法--检测项目及方法
EN 15534-1 Clause 6.1 Appearance(applicable to products) 外观(适用于产品）
EN ISO 1183-1 method A(material) EN 323(profile) Density 密度
EN 322 Moisture content 含水率
CEN/TS 15676 Pendulum test
EN 13451-1 Annex E Inclination plan test
EN 13893 Dynamic coefficient of friction
EN 15534-1 Clause 6.5 Linear mass (applicable to profiles) 单位长度质量(适用于型材)
EN 15534-1 Clause 6.6.2 Thickness width and length (applicable to profiles, only)厚度，宽度和长度 (只适用于型材)
EN 15534-1 Clause 6.6.3 Deviation from straightness (applicable to profiles)
EN 15534-1 Clause 6.6.4 Cupping
EN ISO 179-1 Method ISO 179-1/1fU Impact resistance(applicable to compounds) 抗冲击性
EN 15534-1 Clause 7.1.2.1 EN 477 Falling mass impact resistance落锤冲击
EN 15534-1 Clause 7.1.2.2 Profile cladding
EN ISO 527-2 Tensile properties（applicable to compounds）拉伸性能(只适用于原材料)
EN ISO 178 Flexural properties (applicable to compounds) 弯曲性能
EN 15534-1 Annex A Flexural properties (applicable to non-load bearing products) 弯曲性能
EN 15534-1 Clause 7.4.1 Creep behaviour (Known span in use)
EN 15534-1 Clause 7.4.2 Unknown span in use(未指定实际使用跨距）
EN 15534-1 Clause 7.5 Resistance to indentation 耐压痕性
EN 13446 Nail and screw withdrawal 握钉力
EN 1383 Pull throuth resistance 锲入阻力
EN 15534-1 Clause 8.1.1 Resistance to artificial weathering耐人工老化性(室外产品)
EN 15534-1 Clause 8.1.2 Resistance to artificial weathering 耐人工老化性(室内产品)
EN ISO 811-7 Method A or EN 927-3 Resistance to natural ageing耐自然老化性
EN 15534-1 Clause 8.3.1 and EN 317 Swelling and water absorption吸水率和吸水膨胀率
EN 15534-1 Clause 8.3.2 and EN 321 Moisture resistance (cycle conditions) 耐水性(循环条件)
EN 15534-1 Clause 8.3.3 Moisture resistance (boiling test)耐水性(沸水试验)
EN 15534-1 Clause 8.4 Resistance against termites抗白蚁性
EN 15534-1 Clause 8.5.2 and ENV 12038 Resistance against basidiomycetes耐担子菌性
EN 15534-1 Clause 8.5.3 and CEN/TS 15083-2 Resistance against soft rotting mico-fugi 耐软朽木微生菌
ASTM D3273 Resistance against discolouring micro-fugi耐真菌污染
ISO 16869 Resistance against discolouring micro-fugi 耐真菌污染
EN 15458 Resistance against discolouring algae耐藻类污染
EN ISO 9227 Neutral salt spray Resistance to salt spray耐盐雾性
EN ISO 75-1 and EN ISO 75-2 Method A 1.80MPa Heat deflection temperatur (HDT) 热变形温度
ISO 11359-2 -20℃~80℃ Linear thermal expansion线性热膨胀系数
EN 479 Heat reverison热恢复性
EN 15534-1 Clause 9.4 Heat build-up 生热测试
EN ISO 4589-2 Oxygen Index极限氧指数
EN ISO 11925-2 Single flame source test小火源测试
EN 13823 Single buring item test (applicable to cladding only)单体燃烧测试(适用于覆盖层)
EN ISO 9239-1 Radiant heat source test (floorings)辐射热源法(铺地材料)
EN 15534-1 Clause 10.1 and EN ISO 4628-6 Degree of chalking (for coated products, only) 粉化程度
EN ISO 2813 Change of gloss光泽度变化
EN 15534-1 Clause 10.3 Peel strength(applicable to profiles with laminated foil) 剥离强度