曼谷Bangkok
地点 Location.：曼谷国际贸易展览中心BITEC Bangkok International Trade and Exhibition Centre ( 88 Debaratna Road (km. 1) Bangna Tai. Bangna, Bangkok 10260, Thailand)
展位号 Booth：1G11
机型 Machine：SA-290h
SA-h 高速成型系统
SA-h/p系列高速成型系统（射速415mm/sec），此系列机型将广泛运用于食品包装及医疗产业。具有以下优越特性：
*高刚性模板设计、弹性变形小、成型锁模力更低。
*标配高速比例阀、开模响应更快、定位更准，循环周期短。
*整体管路采用无焊接工艺、降低漏油风险，提升油路清洁度，延长机台寿命。
*标配红外奈米加热圈、升温快、保温性能好、节能超过30%。
*采用PID温度控制、可控制在±1°C。
*采用大L/D比、高混炼螺杆、塑化效果好。
*射台及座移采用双线轨设计、摩擦阻力低、精度更高。
*中惯量单杠射出结构、起速快、重复精度高。
*标配高性能伺服动力系统、节能最高可达70%。
*独特的模块化设计、方便维修。
*更可实现双回路动作，最大程度缩短成型周期。
The High-Speed & Thin-Wall Injection Molding Machine, SA-h/p Series (Injection speed 415mm/sec) are developed for food packaging and medical care.
SA-h/p Series Characteristic：
◆The pipelines adopt no welding processing, decreasing the risk of oil leaking.
◆Improving the cleanness of oil circuits and increase machine life.
◆Standard infrared heater, fast heating, good heat preservation, energy saving over 30%.
◆Adopt PID temperature control, temperature control within ±1℃.
◆Adopt large L/D radio, high mixing screw and good plasticization efficiency.
◆The injection unit support adopts high-precision double linear guides, the lower friction resistance, the higher precision.
◆The medium-inertia single-cylinder injection mechanism, fast response and high repeatability.
◆Equipped with high performance servo power system, energy saving about 30%-70%.
◆Unique modular design, easy maintainanece.
◆Optional equipped with double loops system, improving production efficiency.
